Home > Products > Universal Valve > Gate Valve > Concealed stem elastic seat seal gate valve

Concealed stem elastic seat seal gate valve

Payment Type:
T/T
Incoterm:
FOB
Min. Order:
1 Piece/Pieces
Transportation:
Ocean,Land
Port:
chongqing,,
Share:
  • Product Description
Overview
Product Attributes

Product NameValve

Specification And Modelcomplete specifications

Applicable Industrywide application range

Applicable Mediumwater

Valve Functionadjustment

Parts And Accessoriesvalve body

Temperature Environmentoptional

Drive Modemanual

Processing CustomizationYes

Sealing Materialconsult customer service

Supply Ability & Additional Information

Packagingcontainer

TransportationOcean,Land

Place of OriginChina

Portchongqing,,

Payment TypeT/T

IncotermFOB

Packaging & Delivery
Selling Units:
Piece/Pieces
Package Type:
container
Picture Example:
Gate Valve movement mode:

When the gate valve in the Universal Valve is closed, the sealing surface can be sealed only by the medium pressure, that is, the sealing surface of the gate plate is pressed to the valve seat on the other side by the medium pressure alone to ensure the sealing surface sealing, which is self-sealing. Most gate valves adopt forced sealing, that is, when the valve is closed, external force must be relied on to force the gate plate to the valve seat to ensure the sealing performance of the sealing surface.


Concealed Rod Elastic Seated Gate Valve


Movement mode: The gate plate of the gate valve moves linearly with the Valve Stem, which is also called a rising stem gate valve. Usually there is a trapezoidal thread on the lift rod. Through the nut on the top of the valve and the guide groove on the valve body, the rotating motion is changed into linear motion, that is, the operating torque is changed into the operating thrust. When opening a Special Valve, when the lift height of the gate is equal to 1:1 times the diameter of the valve, the fluid channel is completely unobstructed, but during operation, this position cannot be monitored. In actual use, the top of the valve stem is used as a mark, that is, the position that does not open, as its fully open position. In order to consider the locking phenomenon due to temperature changes, the valve is usually opened to the top position and then retracted 1/2-1 turn as the fully open valve position. Therefore, the fully open position of the valve is determined by the position of the gate plate (i.e. stroke). Some gate valve stem nuts are set on the gate plate, and the rotation of the handwheel drives the valve stem to rotate, thereby lifting the gate plate. This kind of valve is called Rotating rod gate valve or hidden rod gate valve.

Product Categories : Universal Valve > Gate Valve

Home > Products > Universal Valve > Gate Valve > Concealed stem elastic seat seal gate valve
Email to this supplier
  • *Subject:
  • *To:
    Mr. Jim
  • *Email:
  • *Message:
    Your message must be between 20-8000 characters
Send Inquiry
*
*

Related Products List

Home

Product

Phone

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send